Which system suits a Stone thermostatic install?

Combi, unvented cylinder or gravity with a shower pump — all work, all need the correct pressure balance. We measure static and dynamic pressure at the outlet before spec.

Is TMV-2 the right rating for family homes?

Yes — TMV-2 caps the max temperature within safe scald limits. TMV-3 is for care settings. Both are stocked on our Stone vans.

How long does the install take?

2–5 hours for a like-for-like swap; a full day where we're re-piping to a concealed valve. Commissioned with a thermometer and left within manufacturer tolerance.

Will it fix my temperature-swing problem?

In most cases yes, provided the system is balanced. If the underlying issue is a cross-flow into the mains, we find and fix that during commissioning on Stone jobs.

How quickly can you start a job in Stone?

Lead time is usually two to five weeks from a confirmed quote, depending on the spec and our current schedule across the Staffordshire side.

Can you fit a bathroom in a Victorian terrace without losing too much space?

Yes — much of our work in Stone is in narrow Victorian terraces. We typically reset the door swing, move the basin onto a wall-hung run and recess the WC cistern to free up usable floor.

Bathroom Fitting · Stone

Thermostatic Mixer Shower Install in Stone

Full bathroom installations, project-managed by one local team.

Call 01782 901390 Request a Quote

A thermostatic mixer is only as accurate as the install behind it. A lot of the "temperature swing" complaints we get called out to in Stone come down to a cartridge that was never flushed and pipes that weren't dead-tested for cross-flow.

We flush the hot and cold feeds properly, install strainers on both, and commission with a thermometer against manufacturer targets — not a hand-under-water check.

Plenty of the bathroom fitting we quote across Stone starts the same way: a house that's outgrown its original bathroom layout.

Thermostatic Mixer Shower Install FAQs — Stone

Which system suits a Stone thermostatic install?: Combi, unvented cylinder or gravity with a shower pump — all work, all need the correct pressure balance. We measure static and dynamic pressure at the outlet before spec.
Is TMV-2 the right rating for family homes?: Yes — TMV-2 caps the max temperature within safe scald limits. TMV-3 is for care settings. Both are stocked on our Stone vans.
How long does the install take?: 2–5 hours for a like-for-like swap; a full day where we're re-piping to a concealed valve. Commissioned with a thermometer and left within manufacturer tolerance.
Will it fix my temperature-swing problem?: In most cases yes, provided the system is balanced. If the underlying issue is a cross-flow into the mains, we find and fix that during commissioning on Stone jobs.
How quickly can you start a job in Stone?: Lead time is usually two to five weeks from a confirmed quote, depending on the spec and our current schedule across the Staffordshire side.
Can you fit a bathroom in a Victorian terrace without losing too much space?: Yes — much of our work in Stone is in narrow Victorian terraces. We typically reset the door swing, move the basin onto a wall-hung run and recess the WC cistern to free up usable floor.

About Stone

Locally, Stone is part of Stafford Borough Council's area within Staffordshire, covering postcodes ST15. Stone is a Georgian canal-side market town — sash-windowed townhouses in the centre, Victorian villas on Stafford Road, plus large modern estates at Walton and Yarnfield. Quick to reach off A34 and A51 — useful when we're surveying several jobs in a morning.

ST15A34A51A520M6 J14

What we commission on every {town} mixer

What we commit to on every thermostatic mixer shower install job in Stone:

Feeds flushed and strained on every install (standard on every Stone thermostatic mixer shower install install).
Temperature verified with calibrated thermometer at handover (standard on every Stone thermostatic mixer shower install install).
For Stone clients: time-served plumbers and tilers on every job.
For Stone clients: compliant with part g and part p regulations on every install.
For Stone clients: sectors served include landlords, lettings agents and private homeowners.

Where mixer installs fail in {town}

Homeowners on combi or unvented systems wanting stable temperature in Stone hit a recurring set of issues with thermostatic mixer shower install:

Cartridges installed without flushing debris out of the new pipe run — flagged regularly on Stone jobs.

No strainers fitted on the hot and cold feeds — flagged regularly on Stone jobs.

Commissioning by hand-under-water rather than thermometer — flagged regularly on Stone jobs.

In Stone we regularly find failed waterproofing under tiles causing damp on the wall below.

Around Stone this shows up as inadequate boiler flow for a thermostatic shower.

Our thermostatic mixer shower install process in Stone

We work through it in this order, and you'll know what's happening each day:

1Step 1 in Stone: snagging walk-through, sealing and full clean down before handover.
2Stage 2 on site at Stone: tanking and waterproofing before any tile goes on a wet zone.
3Day 3 for a Stone job — free home survey to measure, photograph and talk through your options.
4Step 4 in Stone: itemised fixed-price quotation with product brands listed line by line.

Materials & methods