Do you tank the walls and floor for a walk-in shower?

Always. We use a liquid tanking membrane behind tiles in the shower zone and onto the floor lip before any tile goes down — non-negotiable on every Stoke install.

Can I have a walk-in shower instead of a bath?

Yes, this is one of our most popular Stoke jobs. We remove the bath, re-board, tank, and fit a low-profile tray or wet-floor former in the same footprint.

How long does a walk-in shower install take?

Typical Stoke install is 5–8 working days from strip-out to handover, including tiling and silicone cure time.

What about frameless glass screens?

We fit 8mm and 10mm frameless screens with brushed brass, chrome or matt black brackets — your choice at the design stage.

Can you fit a bathroom in a Victorian terrace without losing too much space?

Yes — much of our work in Stoke is in narrow Victorian terraces. We typically reset the door swing, move the basin onto a wall-hung run and recess the WC cistern to free up usable floor.

Are you fully insured for work in Stoke?

Yes — we hold full public liability cover and every job in Stoke comes with a written workmanship guarantee.

Bathroom Fitting · Stoke

Walk-In Shower Installation in Stoke

Full bathroom installations, project-managed by one local team.

Call 01782 901390 Request a Quote

A proper walk-in shower in a Stoke home isn't just a screen on a tray — it's a tanked floor, a properly bonded substrate, and a tray (or wet-floor former) that's been picked to suit the joists and the door threshold.

We install everything from a single fixed glass panel in a 900mm enclosure up to full 1700mm walk-throughs with a low-profile tray and frameless screens.

Ask ten Stoke households what they want from bathroom fitting and you get ten different briefs, so we start by listening.

Stoke at a glance

Stoke sits in Staffordshire, served by Stoke-on-Trent City Council, with postcodes ST4. Stoke town centre is dense with two-up-two-down Victorian terraces around the railway station, mixed with later infill flats near Campbell Road. Quick to reach off A500 and A34 — useful when we're surveying several jobs in a morning.

ST4A500A34M6 J15

Other services in Stoke

Book your Stoke walk-in shower survey

Free measure-up, three layout options and a fixed quote — typically within 48 hours for Stoke addresses.

Tidy, respectful crews — your home stays liveable
Project-managed by one team — no chasing trades

Call 01782 901390 Request a Quote

Walk-in showers fitted properly across Stoke — tanked, level-finished, and guaranteed in writing.

Common walk-in shower installation issues in Stoke homes

Homeowners replacing a tired bath or cubicle in Stoke hit a recurring set of issues with walk-in shower installation:

Existing waste positions that won't accept a low-profile tray without packing — flagged regularly on Stoke jobs.

Old plasterboard substrates that need replacing before any tanking goes on — flagged regularly on Stoke jobs.

Door thresholds that need re-set to keep the room watertight — flagged regularly on Stoke jobs.

Worth checking in your Stoke bathroom: original lath-and-plaster walls that flex under modern tile weight.

Concrete sub-floors hiding rotten timber boards near the WC, particularly in Stoke properties of this age.

Our walk-in shower installation process in Stoke

This is the order we'll work in once we're on site:

1Stage 1 on site at Stoke: second-fix of sanitaryware, brassware and shower screens.
22. Itemised fixed-price quotation with product brands listed line by line, agreed with you before we start in Stoke.
3Full strip-out, controlled skip removal and protective floor coverings (planned per Stoke room).
4Next on a Stoke fit: tanking and waterproofing before any tile goes on a wet zone.

Materials & methods

Mapei rapid-set adhesives and SP coloured grout for Stoke bathrooms.
Aqua-boarded walls in wet zones rated to BBA standard for Stoke bathrooms.

Why Stoke clients pick us for walk-in shower installation

What we commit to on every walk-in shower installation job in Stoke:

Liquid-applied tanking on every walk-in install, photographed before tiling (standard on every Stoke walk-in shower installation install).
Tray and screen brand options shown side-by-side at the quote stage (standard on every Stoke walk-in shower installation install).
Hundreds of full bathrooms fitted across Staffordshire, every Stoke job.
Suppliers stocked locally — no long lead times on standard suites, and it is in writing for Stoke customers.
Compliant with Part G and Part P regulations on every install, every Stoke job.

Stoke bathroom — Bathroom Fitting finish detail — image 2

Stoke bathroom — Bathroom Fitting finish detail — image 3

Walk-In Shower Installation FAQs — Stoke

Do you tank the walls and floor for a walk-in shower?: Always. We use a liquid tanking membrane behind tiles in the shower zone and onto the floor lip before any tile goes down — non-negotiable on every Stoke install.
Can I have a walk-in shower instead of a bath?: Yes, this is one of our most popular Stoke jobs. We remove the bath, re-board, tank, and fit a low-profile tray or wet-floor former in the same footprint.
How long does a walk-in shower install take?: Typical Stoke install is 5–8 working days from strip-out to handover, including tiling and silicone cure time.
What about frameless glass screens?: We fit 8mm and 10mm frameless screens with brushed brass, chrome or matt black brackets — your choice at the design stage.
Can you fit a bathroom in a Victorian terrace without losing too much space?: Yes — much of our work in Stoke is in narrow Victorian terraces. We typically reset the door swing, move the basin onto a wall-hung run and recess the WC cistern to free up usable floor.
Are you fully insured for work in Stoke?: Yes — we hold full public liability cover and every job in Stoke comes with a written workmanship guarantee.