Which kW rating suits a Stone bathroom?

8.5–9.5kW for one-bath households, 10.5kW where you want stronger winter flow. All need the right cable and MCB — we confirm this on the survey.

Can you upgrade the cable if it's too small?

Yes — we run a 10mm feed in surface trunking or chased-in, and terminate at the CU with a suitable MCB. Part P notified on any Stone job.

How long does the install take?

2–4 hours for a straight swap; half a day where a new cable run is needed. All commissioned and tested with an electrical installation certificate.

Do electric showers work with any water pressure?

Yes — they only need cold mains, which is why they're common on Stone combi and gravity systems. Minimum 1 bar dynamic pressure at the unit.

How quickly can you get to a leak in Stone?

We aim to be on-site for water-leak callouts in Stone within 24 – 48 hours; same-day where we can.

Do you provide a fixed-price quote before starting?

Always. After a free home visit in Stone we send a fully itemised, fixed-price quotation — no surprises on invoice day.

Bathroom Repairs · Stone

Electric Shower Installation in Stone

Leaks, re-seals, tile and grout repairs, shower swaps and quick fixes.

Call 01782 901390 Request a Quote

Electric showers are only as good as the cable feeding them. A 10.5kW unit on an older Stone 6mm cable will nuisance-trip or worse — the swap is straightforward, the electrical check isn't optional.

We check the incoming cable, MCB rating and RCD protection before quoting the unit. If the run needs upgrading to 10mm, we say so upfront and quote it in — not as a "surprise" on day two.

The bathroom repairs enquiries we get from Stone usually share one thing: the room works badly for the way the family actually lives.

Other services in Stone

Electric Shower Installation FAQs — Stone

Which kW rating suits a Stone bathroom?: 8.5–9.5kW for one-bath households, 10.5kW where you want stronger winter flow. All need the right cable and MCB — we confirm this on the survey.
Can you upgrade the cable if it's too small?: Yes — we run a 10mm feed in surface trunking or chased-in, and terminate at the CU with a suitable MCB. Part P notified on any Stone job.
How long does the install take?: 2–4 hours for a straight swap; half a day where a new cable run is needed. All commissioned and tested with an electrical installation certificate.
Do electric showers work with any water pressure?: Yes — they only need cold mains, which is why they're common on Stone combi and gravity systems. Minimum 1 bar dynamic pressure at the unit.
How quickly can you get to a leak in Stone?: We aim to be on-site for water-leak callouts in Stone within 24 – 48 hours; same-day where we can.
Do you provide a fixed-price quote before starting?: Always. After a free home visit in Stone we send a fully itemised, fixed-price quotation — no surprises on invoice day.

Nearby areas we cover from Stone

We work Stone alongside these neighbouring areas on the same weekly run:

Coverage from Stone

Service radius is approximate and based on our regular weekly routes.

Where electric shower installs go wrong in {town}

Homeowners on a combi or low-pressure system needing an instant shower in Stone hit a recurring set of issues with electric shower installation:

10.5kW units bolted onto legacy 6mm cable — nuisance trips or worse — flagged regularly on Stone jobs.

No Part P notification on any of the electrical work — flagged regularly on Stone jobs.

Isolators fitted inside the bathroom zone by mistake — flagged regularly on Stone jobs.

Taps dripping or seized at the spindle — common on Stone surveys.

Grout that's cracked along stud walls and across floor tiles. We see it often enough in Stone to plan for it.

Our electric shower installation process in Stone

This is the order we'll work in once we're on site:

1Day 1 for a Stone job — lift adjacent tiles or panels to confirm the cause.
2Test for 24 hours where appropriate before signing off (planned per Stone room).
3Step 3 in Stone: re-grout and re-seal with mould-resistant silicone.
44. Diagnose the leak source — tile bed, seal, waste or supply, agreed with you before we start in Stone.

Materials & methods

Mapei Ultracolor Plus grout in matched shades for Stone bathrooms.
Replacement thermostatic cartridges (Bristan, Mira, Triton), used in Stone installs.

About Stone

Locally, Stone is part of Stafford Borough Council's area within Staffordshire, covering postcodes ST15. Stone is a Georgian canal-side market town — sash-windowed townhouses in the centre, Victorian villas on Stafford Road, plus large modern estates at Walton and Yarnfield. It's reached easily via A34 and A51, putting it inside our regular daily route.

ST15A34A51A520M6 J14

What we test on every {town} electric shower

What we commit to on every electric shower installation job in Stone:

Cable and MCB sized before the unit is quoted (standard on every Stone electric shower installation install).
Part P notified on every install; certificate emailed to you (standard on every Stone electric shower installation install).
Hundreds of repairs handled across Staffordshire, and it is in writing for Stone customers.
Trusted by local lettings agents for Stone rentals, and it is in writing for Stone customers.
Stocked van — most parts on board for first-visit fix on every install we run in Stone.

Fit a new electric shower in Stone

Cable checked, MCB sized, unit tested. Part P notified. Call 01782 901390.

Most repairs done in a single visit
Fixed-price diagnosis visit
Same-week response across