Wet-Room Conversion · Hanley

Accessible Wet Room Installation in Hanley

Fully tanked, level-access wet rooms for accessibility or premium spec.

An accessible wet room is the right call for a lot of Hanley households planning to stay put long-term. Done properly, it's the bathroom you don't have to think about as mobility changes.

We level the floor, tank to BS 5385, and finish in slip-rated vinyl or porcelain, depending on preference.

Most of our wet-room conversion jobs in Hanley begin with a slow walk round the house, not a quote on the doorstep.

Common accessible wet room installation issues in Hanley homes

Older homeowners planning to age in place in Hanley hit a recurring set of issues with accessible wet room installation:

Inadequate falls that leave standing water at the door threshold — flagged regularly on Hanley jobs.

Vinyl seams left un-welded by general builders, causing leaks within months — flagged regularly on Hanley jobs.

No tanking under the tile — relies on grout, fails within a year — flagged regularly on Hanley jobs.

On the Hanley side of our patch: joisted timber floors needing to be cut down for a level-access tray.

On the Hanley side of our patch: steps into existing showers that no longer suit the household.

Local context for Hanley

Hanley (ST1) falls under Stoke-on-Trent City Council in Staffordshire. Hanley is the city centre — apartments above shops, conversions of former pottery buildings, plus tight rows of terraces in Shelton and Northwood. Quick to reach off A500 and A53 — useful when we're surveying several jobs in a morning.

ST1A500A53A50

Get a fixed quote for your Hanley wet room

Free home survey, joist and waste check, fixed-price written quote — no high-pressure sales.

  • Free survey of structural feasibility in
  • Accessibility-focused designs for homeowners and care providers
  • Workmanship-guaranteed install on every job

Accessible wet rooms across Hanley — tanked, level-access, anti-slip and built to age with you.

Why Hanley clients pick us for accessible wet room installation

What we commit to on every accessible wet room installation job in Hanley:

  • Tanking + falls photographed before tiling on every wet room (standard on every Hanley accessible wet room installation install).
  • R10/R11 slip-rated finishes specified as standard, not as an upgrade (standard on every Hanley accessible wet room installation install).
  • Tanking signed off on every install on every install we run in Hanley.
  • Wet-rooms installed across Staffordshire for OT-led adaptations and private clients — proven across Hanley.
  • Slip-rated finishes on every floor on every install we run in Hanley.

Our accessible wet room installation process in Hanley

Here's how the job actually runs in your house:

  1. 1Step 1 in Hanley: specify the right tray — recessed former or graded screed.
  2. 2Step 2 in Hanley: tile walls and floor in slip-rated porcelain with diamond-cut detailing.
  3. 3Stage 3 on site at Hanley: lay the former or screed, set falls and dry-fit the linear drain.
  4. 4Strip back to floorboard, cut joists and pack a level deck (planned per Hanley room).
Materials & methods
  • Wedi or Marmox shower formers for Hanley bathrooms.
  • Stainless linear drains with removable filters — specced for Hanley jobs.
Hanley wet-room conversion install by Stoke on Trent BathroomsHanley bathroom — Wet-Room Conversion finish detail — image 2Completed wet-room conversion in Hanley — image 3

Accessible Wet Room Installation FAQs — Hanley

What's the difference between a wet room and a shower room?
A wet room has a fully tanked, falls-graded floor with no tray — the whole floor is the drainage zone. A shower room uses a separate tray inside a cubicle.
Are wet rooms safe for older users in Hanley?
When fitted to spec, yes. We use R10/R11 slip-rated tile or sheet vinyl with welded seams, plus grab rails where requested. Level access removes the trip hazard of a tray lip.
Can I claim a wet room on a DFG in Hanley?
Possibly — DFGs are administered by Stoke-on-Trent City Council or Staffordshire authorities. We'll work to whatever spec the OT or grant requires.
How long does a wet room install take?
Most Hanley wet rooms run 7–10 working days including tanking cure time, tiling and silicone.
Do you provide a fixed-price quote before starting?
Always. After a free home visit in Hanley we send a fully itemised, fixed-price quotation — no surprises on invoice day.
Are you fully insured for work in Hanley?
Yes — we hold full public liability cover and every job in Hanley comes with a written workmanship guarantee.
Call 01782 901390